• How to realize one-way rotation of Clutch bearings
    Depends on what kind of one-way bearing. One-way thrust bearings can bear axial force, such as one-way thrust ball bearings, which can bear axial load in one direction, and can be used for axial positioning in one direction, but must not bear any radial load. One-way thrust ball bearings include
    Time:2022-05-06
  • What are the applications of Clutch bearings
    Usually the space in which one-way bearings can be installed is limited. In most cases, the shaft diameter (or one-way bearing inner diameter) is based on mechanical design or other design constraints. Therefore, the selection of the type and size of the one-way bearing is determined according to th
    Time:2022-05-06
  • Bearing selection
    The market has more and more stringent requirements for various mechanical equipment and instruments using rolling bearings, and the requirements for the conditions and performance of bearings are also more and more diversified. In order to select the most suitable bearing from a large number of str
    Time:2022-05-06
  • Processing technology of various bearing parts
    1. Processing technology of the ferrule: The processing of the inner ring and the outer ring of the bearing varies according to the raw material or the form of the blank. The pre-processing process can be divided into the following three types. The whole processing process is: rod or pipe (some rods
    Time:2022-05-06
  • Bearing packaging principle and material introduction
    Bearing packaging summary: Bearing packaging is divided into inner packaging, outer packaging, bearing manufacturing, inspection, cleaning and anti-rust treatment. After being put into packaging, it can achieve the purpose of waterproof, moisture-proof, dust-proof and impact maintenance, accurate be
    Time:2022-05-06
  • Thrust needle roller bearings with seals Large space for grease storage
    It has very thin bones, and the needle roller bearing is equipped with thin and long rollers (the length of the roller is 3~10 times the diameter, and the diameter is generally not more than 5mm), so the radial structure is compact, and its inner diameter and load capacity are similar to When other
    Time:2022-05-06
  • Noise and Maintenance of One-Way Needle Roller Bearings
    The metallurgical quality of one-way needle roller bearing materials used to be the main factor affecting the early failure of one-way needle roller bearings. With the improvement of metallurgical technology (such as vacuum degassing of unidirectional needle roller bearing steel, etc.), the quality
    Time:2022-05-06
All 7 Current1/1PageHomePrevious1NextEnd